Q&A(13)
Q: How long is it from base to floor switch?
A: Hi - the on-off foot switch is located on the cord approximately 24-36" from the base. Thank you for the question.
submitted byLamps Plus Team - 2 years agoBrand expert
Q: Hi! Does this lamp light up a room?
A: Hi - that's hard to say, not knowing the size and shape of your room space. This design will add general overall lighting to a room space, with light also being directed down to sofa areas and seating arrangements. Used with other lighting sources in your room, it will make a great centerpiece for the space. Hope that helps, thank you for the question!
submitted byLamps Plus Team - 1 month agoBrand expert
Q: Is this lamp dimable?
A: Hi - yes, you can use this design with a line cord dimmer. The on-off switch in on the cord, so you would just plug into the dimmer cord and then use that to control the lamp.
submitted byLamps Plus Team - 2 years agoBrand expert
Q: the directions are atrocious. how do the poles screw together? there's an Allen wrench which tried to tighten the screws & now they fell into the pole itself. what are the 2 balls for?
A: We apologize if you are having issues setting the pole sections in place. If you reach out us through your Target account we can troubleshoot the problems you are having and walk you through the assembly process. Thank you.
submitted byLamps Plus Team - 2 years agoBrand expert
Q: How wide is the arc? (from pole to center of bulb)
A: Hi - from the center of the pole to the outside edge of the shade is 50". The shade is shade is 15" wide. The bulb is in the center of the shade, so that puts the pole to center of bulb measurement at 57.5".
submitted byLamps Plus Team - 2 years agoBrand expert
Q: Hi I think I am missing some pieces because I am not able to make it steady. It doesn't screw together to the bottom part, its either somehting missing or I am doing something wrong.
A: Hi - sorry for the issue you are having. If you reach out to us through your Target account we can investigate get you any needed parts should they be missing.
submitted byLamps Plus Team - 2 years agoBrand expert
Q: Hi, I only received two screws. Should I have three?
A: Hi - if you contact our customer service team through your Target account we can investigate and help you out if you are missing any parts.
submitted byLamps Plus Team - 2 years agoBrand expert
Q: can you please tell me the height/length of rod that is straight, before it starts to curve)?
A: Hi - that measures out to 42 1/2". Thank you for the question.
submitted byLamps Plus Team - 3 years agoBrand expert
Q: How is the lampshade attached? Wondering how easy it would be to switch it out if I found an alternate shade.
A: Hi - this design uses an uno lamp shade attachment, with the bulb and a ring holding the shade in place. Uno type shades are a specialty shade type, but you can find replacements. Thank you for the question.
submitted byLamps Plus Team - 3 years agoBrand expert
Q: is the switch on the cord or only on the base?
A: Hi - this design has an on-off foot switch that is on the cord, not the base. Thank you for the question.
submitted byLamps Plus Team - 4 years agoBrand expert