Q&A(18)
Q: is blade hitting a olfa or protective mat under fabric in photo it looks like girl is lifting fabric off the mat?
A: Hello! No olfa or protective mat needed. Simple run material between blade and guard to cut.
submitted byDIYHomeowner - 4 years agoA: Hey there! There is nothing below the fabric in the photo. I hope this helps! -Lucy R
submitted byBlue Ridge Support - 4 years agoBrand expert
Q: Can it be used to cut fabric
A: Because of the variations in fabric types, thicknesses and material, both yes and no. You will need to keep the fabric taught and make sure that it does not exceed more than 1/8" in thickness.
submitted byRecycled - 5 years agoA: The Blue Ridge Rotary Cutter can cut any flat materials up to 1/4 inch thick.
submitted byBlue Ridge Support - 5 years agoBrand expert
Q: How loud is this cutter?
A: Hello Kat! Thank you for your question. Most battery-powered rotary cutters are designed to be relatively quiet, typically producing noise levels around 60-70 decibels, which is comparable to normal conversation level. Thank you for choosing Blue Ridge!
submitted byBlue Ridge Support - 2 months agoBrand expert
Q: How do I change the blade?
A: Hello Valued Customer! Thank you for your question! You can change the blade by following the steps below: 1) Insert a small slotted screw driver into the spindle slot, on the side of the blade that faces away from you when holding naturally. 2) Rotate front facing blade screw counter-clockwise with a slot tip screwdriver and remove the blade screw. 3) Slide the blade away from the upper guard and remove blade. 4) Slide new blade under the upper guard with beveled edges facing you. 5) Align hole in blade with hole in the blade shaft, replace screw and securely tighten the blade screw clockwise. Thank you for choosing BlueRidge!
submitted byBlue Ridge Support - 2 months agoBrand expert
Q: Can I cut fleece material that is about 1/4 thick?
A: Hello There! Thank you for your question. This tool will have a cutting capacity of 1/4" thick and will be able to cut many materials like fabric, cardboard, and vinyl! Thank you for choosing Worx!
submitted byBlue Ridge Support - 3 months agoBrand expert
Q: Can it be used to trim vinyl peel and stick floor planks?
A: Hello Gigi! Thank you for your question. Yes, rotary cutters can cut vinyl floor planks! Thank you for choosing Blue Ridge!
submitted byBlue Ridge Support - 6 months agoBrand expert
Q: Hi can this rotary cutter cut thin acrylic sheets?
A: Hello Mecca! Yes the tool should be able to cut through thin acrylic sheets, as thin acrylic sheets are best handled with a handheld rotary tool. But thick acrylic slabs are best handled by scoring, and intermediate acrylic sheets are best handled with a scroll saw. Thank you for choosing Blue Ridge!
submitted byBlue Ridge Support - 1 year agoBrand expert
Q: want to cut about 1/4 inch old carpet to throw away, can this tool do so ?
A: Hi Richard! Thank you for question. Yes, the rotary tool is delicate enough for clean cutting gift wrapping and tough enough to cut leather and other project materials up to ¼” thick.-DestyneeE
submitted byBlue Ridge Support - 2 years agoBrand expert
Q: Will this cutter come with a charging cord?
A: Hello Linda! Thank you for your question. Yes, the charger is included with the rotary cutter. -DestyneeE
submitted byBlue Ridge Support - 2 years agoBrand expert
Q: Hi! Could I cut wood with this product?
A: Hello Tamika! The Rechargeable Rotary Cutter is intended for cutting flexible, soft materials of up to slightly less than 1/4” in thickness, such as carpet, PVC, cardboard, leather, fabrics, and similar materials. I do not recommend using this rotary cutter on wood. -DestyneeE
submitted byBlue Ridge Support - 3 years agoBrand expert