Delta Children Full Size Bed Rails - 0050

The finish is fine but the screws stripped so incredibly easy. You have to be so very careful of getting the hardware just right or they lock and strip. Had to get a few replacement pieces and it ended up not perfectly fitting the type of headboard and footboard we have, but still better than buying the $200 conversion kit! Glad that it came with all the wooden slats (more than pictured). It does seem slightly unsterdy and I wish there was some sort of center support.

Disappointed that it arrived being damaged in several areas. Unfortunately it's so heavy to lug back into the store to return.

It doesn’t aligned well enough to get the corners inside. At the end you end up having four sharp edges on each side of bed, resulting safety issues where the kids will bump their head. You will end up in emergency rooms for stitches.

I have the Delta Children Perry Crib after several frustrating hours I resorted to only using one bolt to attach the rails to the headboard. I tried every possible configuration and could not get all four brackets to attach with 2 bolts each. Once attached the rails stick out about .5-1 in. from the headboard and footboard. I’ll make it work for now but will be looking for a regular full-size bed. Not worth the frustration in my opinion.

We bought this a year before we were ready to convert the crib. Wish we would have opened it up. All but 2 slats were too short and things didn’t line up like they were supposed too. We would have just bought a separate full sized bed if we realized how horrible it was.

What a joke this thing is. You will need a LOT of additional slots or a box spring. The product description says absolutely nothing about it. The final page of the manual has a small note that says you need a mattress foundation. That’s IT.

Came with all the hardware! A lot sturdier than I thought it was going to be. Perfect for converting my delta crib.

GRR.. this should be basic quality assurance. The kit included the wrong hardware at the very first step. I haven't even checked the rest yet. I received three "A" orientation brackets and only one "B" bracket instead of two of each. I guess baby is sleeping on a mattress on the floor tonight or until I get replacement part...

Easy to put together! It did work with our Delta Archer crib. I couldn’t find the part number anywhere online but it is 0050–130 for Bianca white. Only downfall is we made a few more slats for the bed to rest on because we could see them arching with my 30lb daughter jumping on it. We didn’t use a box spring, this could easily fix the problem but we just used a memory foam mattress (it’s low to the ground this way and I’m not worried about her falling out!)

Don’t understand how the cribs are made with really nice wood but these are made cheaply. Had too much trouble putting the rails together because the brackets were not centered properly. Hopefully these rails will hold up. Order came quicker than expected though.

The support beams do not fit

It worked PERFECTLY with our Disney Princess Enchanted crib. They discontinued the original conversion kit and thankfully this one worked with ours!

When bed is finally assembled it looks great! The instructions were terrible took a lot longer than it should to convert the toddler bed to a full size bed. But once done it’s very nice and looks great!

Used on my Bebe cache crib worked well with existing screws. Even did bed slats to avoid buying box spring. If your mattress is higher than 10inches works best otherwise you’ll probably be hitting bed rails.

There were a few holes off or not predrilled at all, but that wasn't really a problem. The frame matches perfectly with the crib. If you want to use it at a platform bed, you will need to purchase additional a slats.

Great fit for full bed & crib conversion.

Our Delta crib went through 2 kids in 10 years. I searched for a cheap twin bed frame for my 4 yr old daughter and none were less than $200. I converted the crib for under $100. You will need to go the hardware store and buy 8 mounting bolts for about $1.00, I believe 1/4 in diameter and 1 inch length. This is sturdy enough for an adult or children to sleep in. I don't think long term for a larger adult, and definitely no jumping on the bed. Also Target shipped this in under three days.

I LOVE this conversion kit. I had purchased a twin headboard and footboard from a yard sale for my guest room and needed rails for it. The first set of rails i purchased was from a bed store and they were galvanized metal and very flimsy. They sank in when you sat on the bed. Needed a better alternative. Found these at target.com and was thrilled when they arrived. Even though it says it is for a full bed, it does actually fit a twin. Twin and full beds are the same in length. I just used the wood slats for my son's full bed and had local hardware store cut new ones for these rails to fit the twin. I am beyond happy with my purchase. The bed is so solidly built now and i couldn't be happier. The rails are very good solid "laminate" wood. I purchased the white set and they matched the bed perfectly. The "bolt" plates are actually white on the set I purchased. These are showing brown for some reason. Very easy to put together and much cheaper than any "baby" store. Thank you target!

The brackets it came with did not fit our crib conversion. Also it does not come with all the hardware required. The instructions say that u need the 8 screws from the crib to assemble. We did not have the screws so we were unable to assemble the bed. It was very frustrating.

Anyone with the 4 n 1 crib this fram is a life saver....... definitely recommend