Household Essentials Ironing Board Cabinet

This ironing board cabinet is a smart space-saving solution. The cabinet is installed 3.5” into the wall, leaving a little more than 4 inches of cabinet sticking out from the wall. The cabinet can be installed with the cabinet door opening on the left or right, so you can install it on the side that makes the most sense for your space. The cabinet’s door exterior is an unfinished wood that can be stained or painted to match other cabinets in your space. Inside the cabinet is an ironing board that measures 11.75” wide and 41” long, large enough for comfortable ironing while still being small enough to not take up too much space. The ironing board can rotate a full 90 degrees to the right or left, giving you the flexibility to position the board in the most comfortable and convenient space in whatever area you install the cabinet in. The cabinet also has a built-in height adjustment slot for the board, allowing you to raise or lower the board two inches at any time after installation. The ironing board comes with an elasticized cover with padding. The cover is treated with our exclusive NANOMAX scorch- and stain-resistant coating for superior durability. In addition to the ironing board, the cabinet has two interior shelves to house a small iron and/or ironing accessories. The top interior shelf has heat-resistant paneling to protect the shelf when stowing irons that are still warm. Additionally, the top corner of the cabinet door has a dual-pronged hook so you can hang up freshly ironed items or items to be ironed. Cabinet must be installed in-wall between 16-inch on center studs. Ironing board opens 11 inches above bottom of cabinet, so keep that in mind when selecting height for cabinet installation. Cabinet door extends 28.5” from wall with door open and 44.5” from wall with ironing board extended straight forward. Interior of the cabinet measures 13.25” W x 5.375” D. Shelves are shallower than full cabinet depth.