MXR M239 Mini Iso-Brick Isolated Power Supply

The Mini Iso-Brick Power Supply supplies quiet, noise-free DC power to wide range of pedal types while taking up less space than a candy bar. Whether need a space-saving solution for downsized travel board or just need to power a small, carefully curated selection of tried-and-true staples, this little box has what need.First, let’s talk outputs. The Mini Iso-Brick Power Supply has five, and each is fully isolated to eliminate obnoxious, gig-ending ground loop noise. Four of the outputs supply 9 volts of power at 300mA, while a fifth can be set to provide either 9 volts or 18 volts at 800mA depending on needs. With a generous amount of current on tap and the ability to handle both negative and positive grounds, these outputs will accommodate almost any pedal, analog or digital.And don’t let the five outputs restrict —if need to add an extra pedal, the Mini Iso-Brick Power Supply has covered. It comes with a splitter cable that can be used to connect two pedals to a single output, provided they require the same voltage and don’t exceed the output’s current rating. can do this with all of the outputs simultaneously—just purchase the extra cables to do so.Finally, troubleshooting can be a hassle on dark stages, so the Mini Iso-Brick Power Supply comes equipped with LEDs to let know that all connections are solid. Combine that with a lightweight housing that's built like a tank, and can step on stage with confidence that pedalboard will stay powered from gig to gig.