Q&A(27)
Q: Does anyone know if the legs can come off of this to lower the mattress to the floor? Our little is starting to try to climb out and we want to try the mattress as low as it can get.
A: The legs cannot be removed from the mattress support. The lowest the mattress can go is the lowest setting function on the crib.
submitted byStorkcraftProductExpert - 1 year agoA: I would like to know this as well please!
submitted byKFD1440 - 1 year ago
Q: Hello, this crib smells strongly of chemicals. Does the JPMA certification address VOCs/off-gassing? I cannot find this answer on the JPMA website and I was unable to reach anyone at storkcraft or JPMA. Thank you for your help in advance.
A: Short answer is no. JPMA deals more with the structure and function. The Greenguard certifications deal with safeguarding against VOCs and off-gassing.
submitted byTaylor - 11 months agoA: Hi Fcg, Thank you for reaching out to us. We can assure you that the stain we use in our products is non-toxic and water based. New product can sometimes give off an odor called off gassing, after it has been confined in a box from new. This does not normally last more than a few days, however to help dissipate this odor, we would suggest keeping the room well ventilated until the odor has gone and to wipe the product down with a damp cloth, then dry with a different cloth.
submitted byStorkcraftProductExpert - 3 years agoBrand expert
Q: Can you convert back to a crib for second child after converting to a toddler bed? Thanks!
A: Hi EMA! Yes, you can reassemble the toddler bed to a crib and vice versa. If you have any other questions, please call us directly at 1-877-274-0277 or via chat in our website. Thank you!
submitted byStorkcraftProductExpert - 4 years agoBrand expertA: Thank you for your reply! Can you please send me the link for the toddler guard rail? Im having trouble finding it. Thank you
submitted byEMA - 4 years ago
Q: What kind and size of mattress is suggested?
A: Hi Emily, Thank you for your interested in the Storkcraft Beckett 3-in-1 Convertible Crib. For this crib, you will need a crib mattress of standard dimensions of at 27.25 x 51.25 and not thicker than 6 inches. I sincerely hope this addresses your question; if you require any further assistance feel free to contact us by telephone at 1-877-274-0277 Monday to Friday, 6:30-4pm PST or by email on customercare@storkcraft.com, or on our Live Chat program reached through our website. Thank you
submitted byStorkcraftProductExpert - 2 years agoBrand expert
Q: What are mattress dimensions for this crib?
A: Hi Marinka, The Status Beckett 3-in-1 Convertible Crib will fit any standard size crib mattress
submitted byStorkcraftProductExpert - 8 years agoBrand expertA: Hi Marinka, The Status Beckett 3-in-1 Convertible Crib will fit any standard size crib mattress. Length (Assembled) : 52 inches Width (Assembled) : 27.6 inches Height (Assembled) : Up to 5 inches Weight (Assembled) : 7 pounds
submitted byStorkcraftProductExpert - 5 years agoBrand expert
Q: Could you provide information on how to determine the manufacturing date of the crib? Additionally, does this crib have drop sides, and what is the distance between the crib slats?
A: Hi there, the Beckett 3 in 1 Convertible Crib does not have drop sides. The distance between the slats is 51mm on the front and back, 53mm on the ends. And to to determine the manufacturing date you should look for the model sticker on the crib, it is located at the bottom on the left or side panel before the mattress support. If you have more questions, please don't hesitate to contact the Customer Care Team at Storkcraft.
submitted byStorkcraftProductExpert - 2 months agoBrand expert
Q: Will this fit a newton mattress with dimensions of (52" x 28" x 5.5")?
A: Hi, thanks for reaching out. The mattress size should be at least 27.25 inches wide x 51.625 inches long and should not exceed more than 6 inches thick. The mattress should be of such length and width that the gap between the mattress and the sides of the crib is not more than 1-3/16 inches when the mattress is pushed into the corner of the crib. This is for safety reasons, ensuring no gaps.
submitted byStorkcraftProductExpert - 10 months agoBrand expert
Q: There’s one piece left to assemble the crib but it doesn’t fit anywhere? I have to remove all the leg pieces and now it’s too low to be next to my bed. It’s hard to reach my baby because the legs are off the crib. Am I supposed to order another piece?
A: Hi, thanks for reaching out. If you are referring to the stretcher bar, this is for later when converting into the toddler bed. Please see the assembly instructions.
submitted byStorkcraftProductExpert - 10 months agoBrand expert
Q: My 1 year old was standing up, and rubbing his teeth, on the crib, and the paint all chipped off on his face and mouth. I am assuming the paint is lead free? Has this happened to anybody else?
A: Our products are finished with non-toxic paint. Unfortunately with chewing, we cannot control. However we do recommend that if this does start to happen, you can look into purchasing crib protectors.
submitted byStorkcraftProductExpert - 1 year ago
Q: Can you stain the natural white crib? I'm particularly interested in staining the natural part of it, not the white part.
A: The natural crib is finished with a clear coat that is a non toxic product. Staining yourself would not be possible and is not recommended.
submitted byStorkcraftProductExpert - 1 year ago