Target
TV STandsTV Screen Size | Suggested TV Stand Width |
---|---|
up to 40" | up to 40" long |
40" - 50" | up to 40" - 50" long |
50" - 60" | up to 50" - 60" long |
60" - 70" | up to 60" - 70" long |
All Sizes in Inches Unless Otherwise Stated
Target
TV STandsTV Screen Size | Suggested TV Stand Width |
---|---|
up to 40" | up to 40" long |
40" - 50" | up to 40" - 50" long |
50" - 60" | up to 50" - 60" long |
60" - 70" | up to 60" - 70" long |
All Sizes in Inches Unless Otherwise Stated
A: It's not complicated. Pretty simple and straight forward. Working at a leisurely but steady pace by myself it took about 3 hours to assemble it. It's really only a 1 person job as except for perhaps helping with lifting the top & bottom sections or holding components during tightening there's really nothing for a second person to do. The most tedious & time consuming part is installing all the wood dolls and metal connecting rods. I suppose a 2nd person could help with that.
A: Hello Sy, thank you for your question! Assembly time is approximately 90-120 minutes. Hope this information helps!
A: Hello Dee, thank you for your question! The overall dimensions are, 24 Inches (H) x 70 Inches (W) x 16 Inches (D). This TV stand is made with MDF wood with a laminate top layer. Hope this information helps!
A: Material is similar to particle board and has a thin laminate over it, either vinyl or something else. I bought the oak and it does look very nice.
A: There are 3 half moon holes for cords, 1 in each back panel. The panels completely cover the back of the cubby opening and the instructions show installation of panels with the holes at top. So cords would go up, over, and back down to outlet. I think it's better to run the cords down and out so I installed the panels "Upside down." Too late I also thought of just leaving the back panels off to facilitate airflow to audio/video components on the shelves in the cubbies and also for cord management. With the doors closed and back panels on there will be no airflow to any gear in the left or right cubbies.
A: Hello flamingopi, great question! There are three cord management holes, one at the top of each back paneling for each cabinet. Hope this information helps!
A: Hello AndyLL, great question! Although it is not recommend that holes be cut into Saracina Home furniture, you can assemble this TV stand without the back paneling. May we also recommend either the "58" Rustic Farmhouse TV Stand - Saracina Home" (sku: 54616875) or "58" Industrial Farmhouse TV Stand - Saracina Home" (sku: 54616231). Hope this information helps!
A: Instead of cutting the back panel just don't install it. Each of the three "Cubby's" have a separate back panel.
A: Hi gonbasn, thank you for your questions. The over all dimensions for this TV stand are: 24 inches (H) x 70 inches (L) x 16 inches (D) There are three colors available: dark walnut, gray wash, and rustic oak. This TV stand is made of high-grade MDF with a durable laminate finish and clear tempered glass doors. Hope this information helps!
A: Material is similar to particle board and has a thin laminate over it, either vinyl or something else. I bought the oak and it does look very nice.
A: Each self is rated to hold 30 pounds.
A: Hello Cyn, thank you for your question! The handles are black on all color variations. Hope this information helps!
A: Hello Kathy, thank you for your question! This TV stand has more gray than brown tones. Hope this information helps in making your decision!
A: Hello Mark, thank you for your question! The dimensions for the open cabinet without the shelf are, 22.50 inches (W) x 19 inches (H) x 15 inches (D). Hope this information helps!
A: Hello emg, thank you for your question. The back of the stand has the same coloring as the front. I hope that this was able to answer your question.