Sponsored
Taylor Digital LED Rapid Read Thermocouple Kitchen Meat Cooking Thermometer: Black, Calibrating Food Thermometer, -40 to 572°F
About this item
Highlights
- Digital Rapid Read Thermometer
- Bright red backlight display
- Precise Measurement Technology
- Hold Function
- 1 CR2032 battery included
Description
The ultra-thin 1½-mm tip leaves a much smaller hole in your food, so fewer flavorful juices will escape as you check the temperature throughout the cooking process. Also features a HOLD function, which stores the temperature of your food on the bright red backlit display even when removed. The 4" stainless steel probe folds into thermometer casing for storage and acts as the ON/OFF switch.
QUALITY AND PRECISION: Taylor has been making precision products for kitchen measurement for over 170 years, using only the highest quality components for accurate temperature tracking. Measure precisely in both Fahrenheit and Celsius units.
CONVENIENT FEATURES: HOLD function locks temperature into place on the display even when the thermometer is removed from the food.
HIGHLY ACCURATE: Extra-wide temperature range: -40F to 572F / -40C to 300C. IMPORTANT: The F/C switch is located in the battery compartment.
BATTERY INCLUDED: Operates on one CR2032 battery (included).
HELPFUL HINTS: Digital thermometers are NOT meant to be left in food during cooking. The plastic and electronic components could be damaged with excessive heat.
NOTE: The display will go dim during use to conserve battery life, active temperature monitoring is still occurring - press the HOLD button to reactivate the display.
One (1) year limited warranty (excludes batteries)
WARNING: INGESTION HAZARD: This product contains button cell or coin battery
Shipping details
Return details
Q: How do you change from Celsius to Fahrenheit.
A: To switch to C, remove the battery cover and battery to access the switch, located in the hole under the C/F marking on the therm case. Move the switch with a small tool. Replace battery & cover.
submitted byblh224 - 6 months agoA: Hello! It's inside the battery compartment. The thermometer is preset to Fahrenheit. To switch to Celsius, remove the battery cover and battery to access the switch, located in the hole under the C/F marking on the thermometer case. Move the switch with a small tool. Replace the battery and battery cover. Hope that helps. If you have additional questions, please reach back out. Thanks!
submitted byLifetime Brands, Inc. - 7 months agoBrand expert
Q: How do you recalibrate the probe? It started reading way off.
A: Hi Sarah, Here are the directions for recalibrating your thermometer. 1. Fill a container with crushed or chipped ice. 2. Add water slowly until it overflows. 3. Add more ice until it is packed tightly to the bottom of the container, allowing excess to overflow. 4. Insert the stem of the thermometer at least 2” into the container, making sure it does not touch the sides or bottom of the container, and allow it to stabilize for 5 minutes. 5. If the temperature reading is 32°F (0°C), the thermometer is accurately calibrated. 6. If it is necessary to adjust the thermometer, press and hold the “Hold” button for 3 seconds. 7. The display will show “CALu” and enter user calibration mode. 8. When the LCD flashes, press and hold the “Hold” button for another 3 seconds to adjust the calibration value. 9. The thermometer is now calibrated. 10. If the “Hold” button is not press within 5 seconds when the LCD is flashing, the calibration mode is automatically exited back to normal operation. If you have any other questions, please reach back out. Thanks!
submitted byLifetime Brands, Inc. - 3 years agoBrand expert
Frequently bought together
Guests also viewed
Discover more options
Related Categories
- Grill Accessories & BBQ Tools
- Timers & Thermometers
- Hearth & Hand™ with Magnolia O...
- Outdoor Heating Accessories
- Fireplaces & Accessories
- Outdoor Torches