Sponsored
AudioQuest Red River XLR to XLR Analog Audio Interconnect Cable - 1.64' (0.5m) - 2-Pack
$279.95 when purchased online
Target Online store #3991
About this item
Highlights
- Perfect-Surface Copper has a smooth and pure surface
- This plug design allows for a connection devoid of solder, which is a common source of distortion
- Preventing captured Radio Frequency Interference from modulating the equipment's ground reference requires our Noise-Dissipation System
- The triple-balanced geometry uses a separate ground-reference conductor
- Whether preparing with RCA or XLR plugs, the cable's 3 conductors ensure that the positive and negative signals have equally superior low-distortion conducting paths
Description
Solid Perfect-Surface Copper (PSC) ConductorsPerfect-Surface Copper clearly outperforms previous AQ metals that cost over ten times as much. Proprietary metal-processing technology protects the wire's surface at every stage of drawing and fabrication. When high-purity low-oxide copper is kept as soft pure and smooth as possible it becomes a wonderfully low-distortion conductor. In a conventional cable electrical and magnetic interaction between strands is one of the greatest sources of distortion often causing a somewhat harsh dirty sound. Solid conductors are fundamental toward achieving Red Rivers very clean natural sound.
Cold-Welded Gold-Plated TerminationsThis plug design allows for a connection devoid of solder which is a common source of distortion. Instead of solder the process employs a high-pressure technique. Because the ground shells are stamped instead of machined the metal used can be chosen for low distortion instead of machinability.
Metal-Layer Noise-Dissipation SystemIt's easy to accomplish 100% shield coverage. Preventing captured Radio Frequency Interference (RFI) from modulating the equipment's ground reference requires AQ's Noise-Dissipation System (NDS). Traditional shield systems typically absorb and then drain noise/RF energy to component ground modulating and distorting the critical "reference" ground plane which in turn causes a distortion of the signal. NDS "shields the shield" absorbing and reflecting most of this noise/RF energy before it reaches the layer attached to ground.
Triple-Balanced Geometry (Separate Ground-Reference Conductor)AQ's Triple-Balanced Geometry uses a separate ground-reference conductor so the cable's shield is never used as an inferior conductor. Whether prepared with RCA or XLR plugs the cable's three conductors ensure that the positive and negative signals have equally superior low-distortion conducting paths.
What's in the Box:
•Red River XLR to XLR Analog Audio Interconnect Cables
Specifications
•Length: 1.64' (0.5m)
Cold-Welded Gold-Plated TerminationsThis plug design allows for a connection devoid of solder which is a common source of distortion. Instead of solder the process employs a high-pressure technique. Because the ground shells are stamped instead of machined the metal used can be chosen for low distortion instead of machinability.
Metal-Layer Noise-Dissipation SystemIt's easy to accomplish 100% shield coverage. Preventing captured Radio Frequency Interference (RFI) from modulating the equipment's ground reference requires AQ's Noise-Dissipation System (NDS). Traditional shield systems typically absorb and then drain noise/RF energy to component ground modulating and distorting the critical "reference" ground plane which in turn causes a distortion of the signal. NDS "shields the shield" absorbing and reflecting most of this noise/RF energy before it reaches the layer attached to ground.
Triple-Balanced Geometry (Separate Ground-Reference Conductor)AQ's Triple-Balanced Geometry uses a separate ground-reference conductor so the cable's shield is never used as an inferior conductor. Whether prepared with RCA or XLR plugs the cable's three conductors ensure that the positive and negative signals have equally superior low-distortion conducting paths.
What's in the Box:
•Red River XLR to XLR Analog Audio Interconnect Cables
Specifications
•Length: 1.64' (0.5m)
Weight: .65 pounds
Cable/Cord Length: 1.64 feet
Connection Gender: Male-To-Female
Battery: No Battery Used
Warranty: 1 Year Limited Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, please call Target Guest Services at 1-800-591-3869
TCIN: 78775581
UPC: 092592081390
Origin: made in the USA or imported
The above item details were provided by the Target Plus™ Partner. Target does not represent or warrant that this information is accurate or complete. On occasion, manufacturers may modify their items and update their labels.
We recommend that you do not rely solely on the information presented. If you have a specific question about this item, you may consult the item's label, contact the manufacturer directly or call Target Guest Services at 1-800-591-3869.
If the item details above aren’t accurate or complete, we want to know about it.
Shipping details
Estimated ship dimensions: 8 inches length x 2 inches width x 12 inches height
Estimated ship weight: 0.7 pounds
This item cannot be shipped to the following locations: American Samoa (see also separate entry under AS), Guam (see also separate entry under GU), Northern Mariana Islands, Puerto Rico (see also separate entry under PR), United States Minor Outlying Islands, Virgin Islands, U.S., APO/FPO, Alaska, Hawaii
item ships from third party seller: WORLD WIDE STEREO
Return details
This item can be returned to any Target store or Target.com.
This item must be returned within 30 days of the date it was purchased in store, shipped, delivered by a Shipt shopper, or made ready for pickup.
See the return policy for complete information.