JLab Flex True Wireless Bluetooth Open-Ear Earbuds

A: Everyone around you can hear what you’re listening to

A: Just got these and tested this out. When using my iPhone and putting the volume at 75% or higher, others around you can hear what you are listening to very clearly. If volume is around 30-50% you can hear it but not as clearly or as loud.

A: Hi Amk, thanks for reaching out about JLab Flex True Wireless Bluetooth Open-Ear Earbuds. The JLab Flex True Wireless Bluetooth Open-Ear Earbuds will not allow for others to listen to what you’re listening to. If you have any additional questions, we welcome you to contact MyTGTtech at 833-848-8324 every day, between 7am-11pm CST.

A: Hi Amk, great question, no these keep the audio directed straight into your ear canals, and there is next to no sound leakage when these are in your ears.

A: It's touch sensitive but not a real button that clicks. It's honestly a little bit finicky. You can change what the touch controls do in the mobile app.

A: Hi Surah, thanks for reaching out about the JLab Flex True Wireless Bluetooth Open-Ear Earbuds. JLab Flex True Wireless Bluetooth Open-Ear Earbuds have touch controls (touch-sensitive tap). If you have any additional questions, we welcome you to contact MyTGTtech at 833-848-8324 every day, between 7am-11pm CST.

A: Hi Surah, yes we have touch sensitive tap buttons on each of the clip and are activated by a single, double, triple or long press of the button. You can also customize how you want the buttons to work within our JLab App!

A: Yes!!! They will NOT MOVE!

A: Yes! I wore these for a (very slow) half-marathon and they stayed put. I’ve also worn them biking on road & trails and while hiking without issue. I was skeptical when I first got them but have been very happy with them.

A: They would stay cuffed on your ear.

A: It says that it goes for 21 hours

A: Hi Good, thanks for reaching out about JLab Flex True Wireless Bluetooth Open-Ear Earbuds Each earbud supports up to 6 hours of playback time. If you have any additional questions, we welcome you to contact MyTGTtech at 833-848-8324 every day, between 7am-11pm CST.

A: The Flex Open have about 6hr of charge in then before you'd need to pop them back in the charger. If you use one while the other is charging, you'll always be covered.

A: Hi Carifarrell, thanks for reaching out about JLab Flex True Wireless Bluetooth Open-Ear Earbuds. The JLab Flex True Wireless Bluetooth Open-Ear Earbuds have a water resistance rating of IPX4. IPX4 means they are protected against splashing water from any direction. This level of protection makes them sweat-resistant and able to withstand light rain or splashes. However, they are NOT fully waterproof and should NOT be submerged in water. Avoid wearing them while swimming or in heavy showers. If you have any additional questions, we welcome you to contact MyTGTtech at 833-848-8324 every day, between 7am-11pm CST.

A: Hi Ragnar, great question. I'd highly recommend you review the user manual for exact taps to control. See the guide here: https://help.jlab.com/cdn/shop/files/en_Flex_Open_Ear_Manual_en.pdf?v=4998013036917200976 Basically each tap on the JLab symbol performs a certain action. A single tap on the left earbud lowers the volume, while a single tap on the right earbud raises volume, for example. You can also fully customize what the taps perform by pairing them with the JLab app! Hope that helps.

A: Hi Ragnar, thanks for reaching out about JLab Flex True Wireless Bluetooth Open-Ear Earbuds Single, double, and triple are made with short taps, anywhere between 1 and 3 times respectively. A long hold is a long press lasting for approximately 3-5 seconds. If you have any additional questions, we welcome you to contact MyTGTtech at 833-848-8324 every day, between 7am-11pm CST.

A: Hi JLOVER, thanks for reaching out about JLab Flex True Wireless Bluetooth Open-Ear Earbuds No warning is listed on the manufacturer's website If you have any additional questions, we welcome you to contact MyTGTtech at 833-848-8324 every day, between 7am-11pm CST.

A: Hi JLOVER, thanks so much for the great question! No these don't have a Prop 65 warning on them as we've worked hard to remove anything toxic from the materials we use to build the earbuds! Hope that helps

A: Hi TT, great question! While these headphones don't have that built in feature, to announce caller ID out loud, if your phone has that feature, the headphones will work with it! Hope that helps

A: Hi TT, thanks for reaching out about JLab Flex True Wireless Bluetooth Open-Ear Earbuds. The JLab Flex True Wireless Bluetooth Open-Ear Earbuds themselves typically do not have the built-in functionality to announce the caller's name. Here's why: Reliance on Phone Software: Caller ID announcements are primarily a feature of the phone's operating system (in this case, Samsung's One UI on your Galaxy S21). Bluetooth Limitations: Bluetooth primarily focuses on audio transmission and basic call controls. Possible Workarounds: Samsung's Bixby Voice Assistant: If your Galaxy S21 has Bixby enabled, you might be able to use voice commands to check who's calling while the earbuds are connected. Phone's Built-in Features: Explore your Galaxy S21's call settings. Some phones have options to announce incoming calls, often with customizable voice options. If you have any additional questions, we welcome you to contact MyTGTtech at 833-848-8324 every day, between 7am-11pm CST.

A: Hi Lowelldale, thanks for reaching out about JLab Flex True Wireless Bluetooth Open-Ear Earbuds. These were not designed to be worn while sleeping. They will stick out as they go around the earlobe. If you have any additional questions, we welcome you to contact MyTGTtech at 833-848-8324 every day, between 7am-11pm CST.

A: Hi No name, thanks for reaching out about JLab Flex True Wireless Bluetooth Open-Ear Earbuds. The model for these earbuds is EBFLEXRBLK124. If you have any additional questions, we welcome you to contact MyTGTtech at 833-848-8324 every day, between 7am-11pm CST.

A: Hi No name, great question! I can give you the model number here: EBFLEXRBLK124. Hope that helps! If you need anything else, drop us a line at support@jlab.com