About this item
Highlights
- The Ingenuity West End Safety Dog and Baby Gate fits openings 36-60" and is 30" tall
- Fits in doorways or hallways with easy no-drill pressure mount system
- Fits at top or bottom of stairs, on walls or flat banisters, with included hardware kit
- 19" wide door swings both ways w/hold-open & auto-close feature
- Prevent door from swinging over stairs when installed at top of stairs with stopper
- Door locks securely with narrowly spaced bars to keep pets, toddlers, and babies secure
- Gate will appear bent at first, but will be corrected after installation
- Will not fit an opening 39-40", 46-46.75", 56-57.75"
Description
Shipping details
Return details
Q: Ok. The top locks are they supposed to move together? I can’t get the dang thing to open! It’s aligned it is all set but when I try to open it only the top lock comes back.
A: Thank you for your question. The top will move and the bottom will spring open when you lift the gate door slightly and swing open.
submitted bySummer - 6 years agoBrand expertA: I disagree with the answer above. Nothing about this latch mechanism is easy. It is a very poor design. I can tell already, in just the first hour, that my wife is going to tear this thing off the wall. I have taped one of the top pins open just to make it somewhat functional.
submitted byCraig - 6 years ago
Q: Can the extentions all go on one side or do you have to have at least one extention on each side for a 59" opening?
A: Hi - great question. Please follow the instructions which show that if you use all of the extensions they should be used on both sides of the gate. There are some nice images in the instructions that show the best configuration for different openings.
submitted bySummer - 2 years agoBrand expert
Q: Gate door is at an odd angle rather than horizontal. When pressure mounted there is a gaping area at the gate closure mechanism so it will not close. Can & how can this be adjusted?
A: Hi - because the gate is pressure mounted, before installation is completed, the door may appear off-center. As the tension bolts are extended, the door and door latches should come into alignment. If you need further assistance, please contact our Consumer Relations team at 401-671-6551. Thanks!
submitted bySummer - 2 years agoBrand expert
Q: My opening is 54" wall to wall and 51" floorboard to floorboard. will this work?
A: Hi, we're sorry, it sounds like this gate will not work for your particular dimensions. We think you would be best assisted by a member of our team and want to connect you with the correct person. Please contact (401) 671-6551 so we can address your question and specific dimensions ASAP. Many thanks!
submitted bySummer - 3 years agoBrand expert
Q: How can I purchase an additional set of the wall cups? I would like to move the gate to a different door way from time to time.
A: Hi - please contact the Summer Infant consumer relations team so we can help. Thanks!
submitted bySummer - 3 years agoBrand expert
Q: I need it to fit 48" stair opening. I can't figure an extension combination that will fit. 36 + 10=46. +7 = 43. +4 = 40. Any suggestions?
A: Hi! The large 10" extension should work well. With the tension bolts in place, the gate will cover the 48" opening. This would fall under configuration D in the instruction manual. Please reach out to us if you need any additional support! https://www.summerinfant.com/consumer-relations/contact-us
submitted bySummer - 3 years agoBrand expert
Q: Will I be able to install this between walls that are not parallel (one wall is at an angle)?
A: Hi - this gate works via pressure and requires that the walls be parallel in order for it to work effectively.
submitted bySummer - 3 years agoBrand expert
Q: Is this a tension gate? I am looking for a gate that I don’t have to drill anything into the wood trim on either side of the wall opening.
A: Yes, the West End Safety Gate is a pressure-mounted gate that does not require drilling when installing in a doorway or hallway. To install this gate at the top of a staircase, please use the included hardware kit.
submitted bySummer - 4 years agoBrand expert
Q: Is there a way to turn off the auto-close feaure and keep the gate open?
A: Thank you for your question. The West End Safety Gate has an auto-close and hold-open feature. To activate the hold-open feature, open the gate door at least 90 degrees in either direction. If the gate door is opened past 90 degrees, the door will stay open.
submitted bySummer - 4 years agoBrand expert
Q: Will this gate work with molding? I have molding along the bottom of the wall and then (obviously) none where the top part would be
A: Yes, the West End Safety Gate accommodates baseboard molding. Please make sure the gate is installed flush to the floor and adjust the top and bottom tension bolts to accommodate the doorway opening.
submitted bySummer - 5 years agoBrand expert
Related Categories
- Baby Gates
- Outdoor Safety
- Baby Proofing Checklist
- Outdoor Gear & Activity
- Gear & Activity Deals
- Up to 30% select Baby Travel A...